© Edwards Limited 2014. All rights reserved.
Page 5
Edwards and the Edwards logo are trademarks of Edwards Limited.
Installation
NRD317880 Issue A
After removing all packaging:
Remove side panels by lifting (this will disengage the panel from the locating pins) and moving to the side. Be
careful not to drop a panel.
Insert nXDS/XDS pump - refer to
Figure 2
.
Attach inlet and exhaust fittings. Note that sufficient length will be needed to clear enclosure.
Locate first panel on left hand side of pump - refer to
Figure 3
.
Adjust pump position to suit.
Position pump power cable through hole provided.
Switch the pump start switch to ON.
Fit second cover to right hand side of pump - refer to
Figure 4
.
3.3
Installing RV EM Acoustic Enclosure
The various elements of the Enclosure are designed to slot together without additional fixings.
Figure 5 - Attaching inlet and exhaust fittings
