Rev EE/eAmp-Power_INSTR 04/2007 1/5
Installation Instruction
eAmp-Power/EE515PWA
PA Amplifier with DC Power Supply
WWW.EESGI.COM
(Part No: EE-EE515PWA)
4978 Santa Anita Ave. Temple City, CA 91780
Phone Number: 1-877-579-3889
Fax Number: (626) 452-9194
eMail: info@eesgi.com
.
.
1
EE515PWA
MIC IN
LINE IN 1
LINE IN 2
AC/DC BAT AUX SPK
Main Volume Control
+ - + -
- +
The versatile
eAmp-Power
is a DC power supply combined with 15/35W PA
Ampflier. It is designed for stand alone operation such as PA/BACKGROUND
MUSIC, PHONE/PAGING and ANNUNCIATION SYSTEM (FIG1) and it also
interfaces well with our
eVoxcon/EE508VIF
or
Voxbox/EE518
voice module
for enhancement functions (FIG2). Before powering the system on, make
sure all wiring and devices connection are correct, also suggest the main
volume control should be tuned down to minimum level. Refer to (FIG3) for
speaker settings and to (FIG4) for multiple commercial applications.
+ -
110V AC
14-19V AC /40VA+
or
12-24V DC/2A+
12V DC
4-7AHRS Battery
13V DC/1.5A Other Devices
(EE508VIF, EE532EXP, EE518 etc)
4
Ω
-250
Ω
Speaker
( FIG 3 )
( FIG 1 )
-
+
MIC V-CTL
Line 1
V-CTL
Line 2
V-CTL
Specification
Power Supply
Power Source: DC: 12
–
24 VDC,
AC: 14
–
18 VAC
AUX Output Voltage: 13.5 VDC
AUX Output Current: 1.5A
Battery Charger: 13.5 VDC 50~300mA
Audio PA AMP
Operating Voltage: 12
–
24 VDC
Current: 60 mA Standby 800 mA Operate
MIC Input: 1K / 100 mV
Line-in Impedance (2): 600 ohm / 0.5V+
Frequency Response 30Hz ~ 30kHz
Speaker Output: 15W / 8 ohm 30W / 4 ohm
Dimension: 2" X 3" X 0.75"
LEDs Indication:
G - External power source engage
Y - Low battery in charging
Y
G
