2
/
8
1. Important notes
1. To keep this EE-ePW600 unit in good operating condition it needs to be
recharged each time after using it to jumpstart a vehicle or for charging other
electronic mobile devices.
2. If stored for long time periods this unit needs to be charged every 3 months.
3. To ensure safety, reliability and quality, do not dismantle the EE-ePW600. Any
attempt to disassemble this unit may cause danger to yourself or your
surroundings and will also void the product warranty.
4. Do not allow this product to come in contact with water or any other liquids.
5. Do not store this product where it is exposed to direct sunlight or near any air
conditioners, heaters or other heat sources of any type.
6. Do not use this product if you find that the battery is leaking, swelling or giving off
an odor.
2. Functions and Features
This Model EE-ePW600 offers many superb functions such as:
※
High Level of Security and User Safety: Reverse polarity protection, power
output short circuit protection, overvoltage protection, over current protection,
over heating protection, and no sparks which ensures safety and inverse charge
protection. This is a SMART product with all features and conditions of operation
controlled by Artificial Intelligence to secure user’s safety.
※
Minimum starting power status : Even with only three power indicators ON (75%
of full capacity) this unit is able to jumpstart vehicles.
※
Lowest battery voltage/dead battery condition: Even if the voltage of the car
battery is as low as 0.06V (completely dead), the engine can still be started by
using this unit.
※
Red clamp as a main switch: When the red clamp is removed from the positive
terminal of a car battery, then the unit is ready to safely be disconnected from
