5
/
8
the wall charger and the micro USB plug into the micro USB input charge port of
this unit to charge.
2. The LEDs will flash for the entire time it is charging. When it is fully charged then
the 4 LEDs will stay ON with constant illumination.
3. Charge time: approximate 5~6 hours based on 5V/1A if the battery energy is
consumed completely.
4. Remove the power plug from the outlet when it is fully charged.
6.3 Charge in a vehicle
1. Make sure the voltage of the car is 12V version. Do not charge this unit on 24V
vehicles.
2. Insert the power plug of a 5V/2A USB converter into the cigarette lighter socket.
Plug the USB plug of USB cable provided with this product into the USB output
port of the converter and the micro USB plug into the micro USB input charge
port of this unit to charge.
3. The LEDs will flash for the entire time it is charging. When it is fully charged then
the 4 LEDs will stay ON with constant illumination.
6.4 Charge from a desktop computer
Same as standard charge: Plug the USB plug of USB cable provided with the
product into the USB port of a desktop computer (computer must be ON) and
the micro USB plug into the micro USB input charge port of this unit to charge.
6.5 Jumpstart
（
12V gasoline car under 3,500 c.c.
）
1. Even if there is only three power indicator ON (75% charged), this product can
jumpstart vehicles with 12V gasoline engines that are under 3,500 c.c. After
jumpstarting vehicles this unit must be charged immediately to maintain the
battery power status in a good condition.
2. Before jump starting a vehicle turn off all electric accessories such as: air
conditioner, car audio, lights and etc.
