7
/
8
※
Notes
：
1. Before jump starting the engine of vehicles, make sure the blue plug of the Jump
Start Cable is securely inserted into the bottom of this unit. Otherwise a poor
connection will fail to jumpstart vehicles and may even cause the blue plug to
become burned.
2. If the vehicle jumpstart fails the first time then check (1) whether the connection
of the clamps to the vehicle battery is good or not (2) whether this unit’s power is
adequately charged or not (3) whether the vehicle has other starting issue.
3. If the environment temperature is lower than 10
℃
, and the vehicle engine did not
start the first time after the unit was connected to the vehicle battery it is
because this unit contains an auto-reset function. If this occurs turn the ignition
switch several times to warm up the unit’s battery. The vehicle engine can be
easily started when the unit’s battery reaches its normal working temperature to
output large current. (If a vehicle needs large current, the unit has to be warmed
up to maximize the current output to start the vehicle engine smoothly. This is a
feature of this unit.)
7. Output: USB DC 5V/2A
1. Charge 5V mobile phones and other electronic products from the USB 5V 2A
output port of this unit.
2. Connect the electronic device to be charged to this unit and then press the power
switch. When the power LEDs are lit up this means the product that is
connected is being charged.
8. LED Illumination (LED flash light)
Press the power switch twice to start the LED torch light and then press once to
change lighting modes. There are 3 lighting modes: Torch, Quick Strobe, and
Slow Strobe. Pushing the power switch the fourth time will turn the light OFF.
