5
1) MOUNTING THE UNIT TO THE WALL
THIS HEATER MUST BE INSTALLED IN A LOCATION WHERE IT IS NOT SUBJECT TO
FREEZING TEMPERATURES.
1.
The heater should be mounted under the sink as close to the point-of-use as possible. Ideal position is
fittings pointed down, but the heater can be mounted in any orientation
.
2.
Make sure to leave a minimum of 8 inches service
clearance at the end
OPPOSITE
the fittings.
3.
Remove the cover and fasten to the wall using the
four mounting holes at each corner of the back plate.
Replace the cover.
Downloaded from https://gadgetsgo.com/Eemax-Accumix-II-277V-tankless-commercial-sinks.html Authorized Eemax Distributor
