III. ELECTRICAL HOOK-UP
WARNING
THIS UNIT HAS MULTIPLE POWER SUPPLIES. ENSURE TO DISCONNECT
ALL POWER SUPPLIES BEFORE SERVICING THE WATER HEATER.
“Eemax Home Advantage” heaters are manufactured to the following specifications:
This unit must have its own independent circuits, using 2 SETS of UL listed 2 conductor and
ground core copper wire cable of the appropriate size protected by 2 separate and
independent correctly rated Double Pole Breakers. (208, 220, 240 V, see Figures 4 and 5).
Wire entry into the unit must be made through the 4 holes provided in the flange on the
backplate
. Ensure to check national and local building codes.
The Rating of the branch-circuit overcurrent protective device shall be 150% of the rating of the
unit (see chart above) per UL 499 18.4.
The “live” wires should be connected to the slots in the terminal block marked L1 and L2. The
ground lead must be connected to the slot marked GND. GROUND MUST BE BROUGHT TO
THE “GROUND” AT THE CIRCUIT BREAKER PANEL.
DANGER
FAILURE TO GROUND THE SYSTEM MAY RESULT IN DEATH OR SERIOUS INJURY.
M O D E L TY P E
V oltage
k W output
A M P E R A G E
S S 015240TC
240V
15 2 x 32 A M P S
S S 019240TC
240V
19 2 x 39 A M P S
Figure 4
7
O
N
O
N
O
F
F
O
F
F
O
N
O
N
O
F
F
O
F
F
2 Separate and independent
correctly rated Double pole
breakers (240/208 Volts)
Figure 5
Circuit Breaker Panel
