BoxPC-NUCV|NUCR
Device Reference Manual – P – Revision 3
E.E.P.D. GmbH | Gewerbering 3 | 85258 Weichs
Copyright © 2019|2020 by E.E.P.D. GmbH. All right reserved. |
Rev.3.0
15
Interfaces
Connection Overview
The BoxPC is equipped with the following standard interfaces:
1
– 2x Mini-DP++ connector
2
– Dual-USB 3.0 port, type A
3
– 2x Ethernet 10/100/1000 Mbit/s (RJ45)
4
– Power supply
5
– Power button
6
– MicroSD card slot
7
– USB 3.0 port, type A
Depending on the version, additional interfaces are available. The following
table shows the standard systems.
System ordering
code
Description
BPCNVA
V1202C / 2C / 4T / 2.3 GHz – 3.2 GHz / 12 – 25 W
BPCNVB
V1605C / 4C / 8T / 2.0 GHz – 3.6 GHz / 12 – 25 W|
#
BPCNVC
V1756C / 4C / 8T / 3.25 GHz – 3.6 GHz / 35 – 54
W*|
#
BPCNVD
V1807C / 4C / 8T / 3.35 GHz – 3.8 GHz / 35 – 54 W*
BPCNVE
V1404B / 4C / 8T / 2.8 GHz – 3.6 GHz / 12 – 25 W
BPCNRA
R1505G / 2C / 4T / 2.4 GHz – 3.3 GHz / 12 – 25 W
BPCNRB
R1606G / 2C / 4T / 2.6 GHz – 3.5 GHz / 12 – 25 W
BPCNRC
R1102G / 2C / 2T / 1.2 GHz – 2.6 GHz / 6 W
BPCNRD
R1305G / 2C / 4T / 1.5 GHz – 2.8 GHz / 8 - 10 W
*supports only max. 35W TDP settings |
#
ODM only
Tab. 3: Standard Systems
Front View
Fig. 12: BoxPC-NUCV Front View
Rear View
Fig. 13: BoxPC-NUCV Rear View
4
3
2
1
5
7
6
