PROFIVE® NUCE_C 25 W
Hardware Reference Manual – P – Revision 1
E.E.P.D. GmbH | Gewerbering 3 | 85258 Weichs
Copyright ©2020|2021 E.E.P.D. GmbH.
All rights reserved.
31
10/2021 Revision 1.7
Power Button Connector
Press power button once to start up.
Press power button to shut down into S3/S4 (Standby/Hibernate; depending
on OS setting).
Hold power button (> 4 sec.) to shut down into S5 (OFF).
Fig. 46: Molex Power Button Connector Detail
Fig. 47: Molex Power Button Connector Schematic
Counterpart – plug:
MOLEX Pico Blade 0510210400
Power cable, 80 mm:
Ordering number W-NUPWON3
Pin
Signal
1
PWR_LED_ANODE 3.3V +/- 5%
with 100 Ohm series resistor
2
PWR_LED_CATHODE
3
GND
4
POWERBUTTON
Tab. 8: Molex Power Button Connector
F
e
a
tu
re
D
e
tai
ls
