PROFIVE® NUCE_C 25 W
Hardware Reference Manual – P – Revision 1
E.E.P.D. GmbH | Gewerbering 3 | 85258 Weichs
Copyright ©2020|2021 E.E.P.D. GmbH.
All rights reserved.
36
10/2021 Revision 1.7
BIOS
The BIOS ROM has a built-in Setup program that allows users to modify the basic system configurations. This type of information is stored in battery-backed CMOS
RAM, so that Setup information is retained when the power is turned off.
The following description shows a snapshot of the BIOS setup. Later BIOS updates may change the content slightly.
Entering Setup
Power on the board and press and hold [ESC] immediately to enter Setup.