PROFIVE® NUCE_C 25 W
Hardware Reference Manual – P – Revision 1
E.E.P.D. GmbH | Gewerbering 3 | 85258 Weichs
Copyright ©2020|2021 E.E.P.D. GmbH.
All rights reserved.
67
10/2021 Revision 1.7
BIOS Settings
Options
Description
UART Port 1
<Disabled>
<Enabled>*
Configure UART port using options:
[Disabled] Disable device
[Enabled] Enable device and use below settings
Base I/O Address
<3F8h>*
<2F8h>
<3E8h>
<2E8h>
<338h>
<228h>
<220h>
<238h>
System I/O base resources
Interrupt
<IRQ3>
<IRQ4>*
<IRQ6>
<IRQ7>
<IRQ11>
System interrupt resources
Peripheral Type
<RS232>*
Port Mode: RS232
Tab. 27: UART Port 1 Configuration
