document version: 1.0.0 - English
Instruction manual
–
Never operate the worker robot in a location where combustible gases, liquids,
vapors, dusts or other combustible materials and substances are present.
–
Read and follow recommendations issued by government authorities for
identifying and avoiding the hazards of combustible gases, liquids, vapors, dusts or other
combustible materials and substances.
If a rotating metal blade strikes a rock or other hard object, sparks may be created, which
can ignite flammable materials under certain circumstances. Flammable materials can
include dry vegetation and brush, particularly when weather conditions are hot and dry.
–
When there is a risk of fire or wildfire, do not use the worker robot around
flammable materials or around dry vegetation or brush.
–
Contact your local fire authorities if you have any question about whether
vegetation and weather conditions are suitable for the use of a metal blade.
Use of this worker robot can generate dust and other substances containing chemicals
known to cause respiratory problems, cancer, birth defects and other reproductive harm.
– Consult governmental agencies and other authoritative sources on hazardous
materials if you are unfamiliar with the risks associated with the particular substances you
are cutting or with which you are working.
Inhalation of certain dusts, especially organic dusts such as mold or pollen, can cause
susceptible persons to have an allergic or asthmatic reaction. Substantial or repeated
inhalation of dust or other airborne contaminants, especially those with a smaller particle
size, may cause respiratory or other illnesses.
–
Control dust at the source where possible.
–
To the extent possible, operate the worker robot so that the wind or operating
process directs any dust, mist or other particulate matter raised by the worker robot away
from the operator.
–
When respirable dust or other particulate matter cannot be kept at or near
background levels, always wear a respirator that is approved by NIOSH and rated for
worksite-specific conditions. Follow the recommendations of governmental authorities
and occupational and trade associations.
If the vegetation being cut or the surrounding ground is coated with a chemical
substance, such as a pesticide, fertilizer or herbicide: Read and follow the instructions
and warnings that accompanied the substance coating the vegetation or surrounding
ground.
The Toadi Order BV, Belgium
Original Instruction
Page of
13
47