document version: 1.0.0 - English
Instruction manual
To activate the fixed digital perimeter function contact the Toadi customer support desk at
support@toadi.com
10. Charge the worker robot
Read and follow the worker robot and docking station safety precautions and instructions
in this manual. Be alert for signs that the integrated battery may be damaged. To reduce
the risk of personal injury from short circuit, fire and explosion, never use or charge a
worker robot if the hood or housing is cracked, deformed or excessively hot, if battery
fluid is leaking from the battery compartment, or if the battery is otherwise damaged.
WARNING
To reduce the risk of electric shock, charge the worker robot only in the docking
station. Do no remove the battery or attempt to charge it using an external power supply.
10.1 Automatic charging
The worker robot will begin charging automatically when it docks in the docking station at
the end of the mowing operation and its energy level is below a certain value.
10.2 Starting charging manually
•
Lift the worker robot and place it 50 cm before the charger, with its back towards
the charger.
•
Push the worker robot backwards, into the docking station.
The eyes of the worker robot light up after docking.
Please see following video on how to charge the worker robot manually:
https://www.youtube.com/watch?v=YlrXu-mcPzk
During charging the worker robot will show the battery status via eye animations.
Charging time depends on a number of factors, including battery condition and the
ambient temperature. Exposure to direct sunlight can lead to increased temperatures
inside the machine and battery compartment, which can increase battery charging times.
The Toadi Order BV, Belgium
Original Instruction
Page of
30
47