document version: 1.0.0 - English
Instruction manual
use with receptacles that are weatherproof only when the receptacle is covered
(attachment plug cap not inserted and receptacle cover closed.)
–
Never plug the power supply into a power strip or extension cord.
To reduce the risk of personal injury or property damage:
– Return the worker robot to the docking station and disconnect the power supply
from the power receptacle if there is a threat of lightning strikes in the vicinity.
DANGER
Using a damaged power supply cord or plug may result in fire, electric shock and other
personal injury or property damage. To reduce the risk of electrocution:
– Check the power supply cord and plug regularly for damage. If they
become damaged, immediately disconnect from the electrical outlet. Never
use a damaged power supply cord or plug.
– Do not abrade, crush, jerk, or otherwise abuse or misuse the power supply cord
or plug. Protect it from heat, oil and sharp edges.
– If the power supply cord or plug becomes damaged, replace the power supply.
– Unplug the power supply cord when the docking station is not in use.
– Never yank or jerk the power supply cord to disconnect. To unplug, grasp the
plug, not the power supply cord.
– Make sure the power supply cord is positioned and secured or marked so that it
will not be stepped on, tripped over, come in contact with sharp objects, moving parts, or
otherwise be subjected to damage or stress.
6. Maintenance, Repair and Storage
6.1 Warnings and instructions
WARNING
There are no user-authorized repairs for the worker robot, docking station or power
supply. To reduce the risk of fire, electric shock or other personal injury and property
damage:
The Toadi Order BV, Belgium
Original Instruction
Page of
19
47
