Translation of original operating
manual
EFA Trimmer
OM NO.: 001 580 629
13 of 22
Version 13.11.2020
WARNING
Risk of injury!
When it starts, the trimmer lashes
out slightly due to the torque.
Ensure a firm hold!
7. At the end of a work step, lift the trimmer
so that the blade cuts off the strip.
8. A work step must be carried out to the end
until the cut material separates from the
trimmer.
The electric trimmer has an overload protection.
The coupling will slip upon reaching harder
materials, e.g. bones.
WARNING
Blocking hazard!
Do not stop the trimmer during the
cutting process.
ATTENTION
Improper handling will lead to
increased wear!
5.3 Turning off
Release the switch lever
The locking lever switches the trimmer off
automatically by a return spring; the trimmer is
then secured against unintentional restart.
5.4 Procedure for non-utilization
The trimmer is protected against unintentional
restart by various safety devices
EFA Trimmer 90E / 130E
1. Check whether the electric motor is in
position OFF
Secure the trimmer (1)
2. Move the locking lever (1) to the left, then
push it upwards until the retaining bar (3)
is uncovered, Abb. 15 and Abb. 16.
Secure the trimmer (2)
3. Hold the locking lever (1) in position, Abb.
4. Hook the trimmer (4) in the retaining bar
(3). The trimmer must be placed with the
blade side on the plate (5)
1
3
5
4
1
