background image

   

Pneumatically operated breastbone saw EFA 57 

Operating instructions 

EN

 

 

Part. no. 110 885 700 – Rev. 00 – 01.2020 

 

5 of 34

 

 

Do not use materials harmful to health. 

If, contrary to the intended use, materials harmful to health are to be processed then 

Schmid & Wezel GmbH

 

must be informed in writing about the planned use and the protective measures taken by the customer/ 
operating company. 
The customer/operating company is solely responsible for suitable protective measures (e.g. extraction 
devices, respiratory protection, protective suits, etc.) and company directives. 
If the EFA pneumatically operated breastbone saw is not used as intended or is modified without the approval 
of 

Schmid & Wezel GmbH

, persons could be injured and the machine damaged. 

The operating permit is invalidated. 

The intended use includes in particular that you: 

  Claims for defects, liability, warranty 

Warranty and liability claims for personal injury and damage to property are excluded in particular in the 
following cases: 

Liability 

The manufacturer accepts no liability for accidents, machine damage and consequences of machine failure 
resulting from failure to observe the operating instructions. In addition, the local accident prevention 
regulations and general safety regulations for the area of application of the machine apply. 

Limitation of liability 

All technical information, data and instructions for the operation of the machine contained in the operating 
instructions are up to date at the time of delivery. They are provided to the best of the manufacturer's 
knowledge, taking into account previous experience and knowledge. The manufacturer reserves the right to 
make technical modifications in the course of further development of the machine described in these operating 
instructions. No claims can therefore be derived from the information, figures and descriptions in these 
operating instructions. The manufacturer shall be liable for any errors or omissions within the scope of the 
warranty obligations entered into in the contract, to the exclusion of further claims. 
Claims for damages are excluded, irrespective of the legal basis on which such claims are derived. Only the 
text of the 

operating instructions

 is authoritative. 

The textual and graphical representation in the operating instructions does not necessarily correspond to the 
scope of supply or a spare parts order. Illustrations in these instructions are not to scale. 

  Observe the operating instructions and company directives, 

  Observe maintenance instructions and intervals, 

  Immediately rectify any faults that impair safety, 

  Do not operate the EFA pneumatically operated breastbone saw if safe working with it is not possible, 

  Do not structurally modify the EFA pneumatically operated breastbone saw without authorisation. 

  Improper use or unsuitable use, 

  Improper transport or storage, 

  Improper assembly and/or initial start-up, 

  Improper operation (operating errors), 

  Disregarding of operating instructions/company directives, 

  Faulty or negligent handling, 

  Improper maintenance/repair, 

  Unsuitable equipment or spare parts that are not approved by 

Schmid & Wezel GmbH

 Maschinenfabrik, 

  Natural wear and tear, 

  Improper or unprofessional rectification of defects by the customer/operating company or third parties, 

  Unauthorised structural changes to the machine without written permission from 

Schmid & Wezel GmbH

  Chemical, electrochemical or electrical influences – unless they are the responsibility of 

Schmid & Wezel 

GmbH

Summary of Contents for EFA 57



































Reviews: