Mobile animal stunning device VBE-M
29
13.3 Repairs
● If the device malfunctions, report the defect to the authorized service centre ;
● In case of repairs and inspections in unauthorized service centres, the manufacturer is not
responsible for the technical condition of the device and its proper functioning;
● In case of any maintenance or repairs of the device, it must be disconnected from the power
source.
13.4 Disposal
CAUTION!
If the device is completely worn out, it must be disposed of in an appropriate electrical and
electronic device recycling plant.
Disposal of the device:
Disposal of the packaging:
The device packaging was made of recyclable materials. Individual packaging elements must be
disposed of responsibly and in accordance with waste management regulations.
●
the crossed-out wheeled bin symbol (placed on the device) indicates that it is strictly
forbidden to place the device in a mixed waste container;
●
the device was made of materials suitable for secondary raw materials;
●
the device is marked as compliant with Directive 2012/19 / EU of the European
Parliament and of the Council of 4 July 2012 on waste electrical and electronic
equipment (WEEE);
●
correct disposal of the device may contribute to reducing the negative impact on the
natural environment and human health;
●
the device must be disposed of in accordance with local regulations regarding the
disposal of electrical and electronic waste, at an appropriate collection point;
●
it is forbidden to leave the device unattended, because it can be a threat to the natural
environment and human health.
Packaging marked with this symbol
should be placed in the blue container
(PAPER)
Packaging marked with this symbol should
be placed in the yellow container (METAL,
PLASTIC MATERIALS)
14. TROUBLESHOOTING
CAUTION!
● If the red light (STUNNING) on the device turns on when there is no stunning process, it
means that there may be a stunning voltage on the electrodes. It is absolutely necessary
to stop work, turn off the device and notify the authorized service centre.
● If the red light (STUNNING) does not turn on during the stunning process, have the device
serviced immediately by the authorized service centre.
Examples of troubleshooting procedure:
Problem
Cause
Recommendations
Bursting of blood vessels and
bone displacement; animal not
properly stunned.
Incorrect stunning parameters.
Incorrect stunning method.
Restless animal.
Select correct stunning parameters:
frequency, time, voltage.
Analyze the stunning process.
Device not working.
Blown fuse (3.15 A).
Replace the fuse (3.15 A).
