Mobile animal stunning device VBE-M
8
Table 4 Minimum current depending on the type of animal
Type of animal
Minimum current [A]
sheep, goats, calves
1.0
lambs
0.6
pigs
1.3
cattle <6 months ÷ >6 months
1.25 ÷ 1.28
7. MAIN CONTROLLER
7.1 Control panel - buttons, indicators and displays
Table 5 Description of the control panel
The control panel is used to change the following stunning program values:
●
current [A];
●
frequency [Hz];
●
stunning duration [s].
The control panel also allows to:
●
define new stunning programs;
●
set current date and time.
Fig. 4 Control panel
Buttons
selecting between parameters / parameter values
enter (confirm)
escape (exit)
switching the stunning program
changing the value on the display
[V]
from voltage to
frequency and back
service button
Signaling indicators
Displays in readiness for operation and stunning modes
[Alarm]
no SDHC card
[Prog]
stunning program number
[Pgm]
programming mode
[A]
current [A]
[HV]
high voltage on the electrodes
[C]
duration [s]
[Proc]
inactive
[V]
voltage [V] / frequency [Hz] - change with
button
Displays in programming mode
[A]+[C]
name of the edited parameter
[V]
value of the edited parameter
[Prog]
number of the edited program
