EFA breastbone cutter Z 10 D
Translation of the operating instructions
EN
V 05.2021
3 of 21
Trained person (specialist personnel)
Persons who have obtained a professional qualification and have demonstrated this by checking the results or
passing an examination are considered to be trained persons.
1.3
Scope of supply
Upon receipt of the delivery, check immediately whether the scope of supply corresponds to the
accompanying documents.
Submit a complaint in the event of:
apparent transport damage immediately to the supplier,
apparent defects/missing items, to
Schmid & Wezel GmbH
.
These operating instructions describe the
EFA breastbone cutter Z 10 D
with all possible options.
Options are not necessarily included in the scope of supply and can only be retrofitted to a limited extent.
1.4
Intended use
Danger!
Never reach into the cutting
area of the cutter.
You could cut off limbs!
Areas of application
The cutter is suitable for use in medium sized and large plants and is used for cutting open the breastbone of
calves, sheep, hogs and sows.
The machine is not equipped for a different type of use. Should the user desire to use the equipment for a
different purpose than intended, please contact
Schmid & Wezel GmbH
(
S&W
).
For all other types of use, the user must be advised of the inherent accident hazard and increased wear.
In the event of non-compliance, the liability shall be borne by the user alone.
The cutter is only allowed to be used:
in fully functional condition,
with properly functioning safety devices,
with the equipment approved by the manufacturer.
Do not use materials harmful to health.
If, contrary to the intended use, materials harmful to health are to be processed then
Schmid & Wezel GmbH
must be informed in writing about the planned use and the protective measures taken by the
customer/operating company.
The customer/operating company is solely responsible for suitable protective measures (e.g. extraction
devices, respiratory protection, protective suits, etc.) and company directives.
If the EFA cutter is not used as intended or is modified without the approval of
Schmid & Wezel GmbH
,
persons could be injured and the machine damaged.
The operating permit is invalidated.
The intended use includes in particular that you:
Observe the operating instructions and company directives,
Observe maintenance instructions and intervals,
Immediately rectify any faults that impair safety,
Do not operate the cutter if safe working with it is not possible,
Do not make any structural changes to the cutter without authorisation.