CIRCUIT DIAGRAMS
1 circuit
2 circuits
A1
A2
IN
11
12
14
IN
IN
IN
A1
A2
IN
21
11
22
12
24
14
IN
IN
IN
DIMENSIONS
MAXIMUM RECOMMENDED LOAD
Main reset
To cancel the electronic timer settings (hours, dates, settings, etc.), it is necessary to maintain simultaneously pushed
the buttons ( and ) in the main menu, for
3 seconds
;
All the screens will be lit;
After some time, the electronic timer will request the date and hours settings.
If it also necessary to cancel all the saved programs, you should also push the key.
Random mode setting
(2 circuits)
- setting of the maximum time of ON and OFF for the relay on random mode, “random”, which is the same
for both, but connected to ON separately; menu input by pushing the button; using the cursors for
choosing the wanted screen for:
- setting of the maximum time to connect to ON the relay for minutes - temporising will be in random time
from 1 to
minutes;
- setting of the maximum time to disconnect to OFF the relay for minutes - temporising will be in random
time from 1 to
minutes;
Screen : push the button to enter; with the cursors setting of the maximum time to connect to ON (for minutes),
confirmation by pushing the button; the screen will appear.
Screen : push the button to enter; with the cursors setting of the maximum time to disconnect OFF (for minutes),
confirmation by pushing the button; the screen will appear.
At any moment it is possible to exit all the menu screens without saving settings by pushing the buttons or .
WIRING DIAGRAMS
1 circuit
2 circuits
L
N
L/
N
External Input
L
N
L/
N
External Input
3,5mm
Note:
The external input must be operated via a switch.
DIN TH 35
