11
Effecta AB - Västra Rågdalsvägen 21 - 434 99 Kungsbacka - +46(0)300 - 22320 - export@effecta.se
▀
Menus
Showing carbon dioxide concentration, becomes
active at a flue temperature of 100°C.
Primary air damper is open 70%
Turning off the boiler.
Menu for firing
Boiler 47°C
Flue 45°C
B:stop
C:menu
P_
S_
CO
2 =
__.__ %
Secondary air damper is open 30%
Calibration of
Lambda sensor?
C:Next
A:Yes
Menu for adjustments
Calibration ongoing
Setting for
desired Co
2 : 13,5 %
C:Next
B:Top
A:Down
Total time: 143h
After cleaning 18h
Has cleaning been done?
C:No
B:Yes
Calibration must be
done before the first
firing. I.e. there must be
no fire in the boiler.
Total operating time
for the boiler.
Displays the operating
time after cleaning.
Press to reset.
C
C
A
Fired with / Running on pellets
C:No / No
B:Yes / Yes
C
C
The pump stops when flue = 85°C
B
The pump starts when flue
= 95°C
C:Next
B:Top
A:Down
C:Next
B:Top
A:Down
C
Use the fan
B:No / No
A:Yes / Yes
C
Charging pump start
temperature.
Charging pump stop
temperature.
In the case of a weak
draught, the boiler fan
can be used for pellets
burning.
Normally the concentration does not change. If the
wood is extremely dry, it can be reduced or the re-
verse in the case of damp wood.
Has cleaning been done?
C:No
B:Yes /
C
Effecta Woody Lambda
Boiler 47°C
Flue 45°C
A:start
C:menu
P_
S_
Starts the boiler
Indicates boiler temp.
Indicates flue
gas temp.
Damper status.
Damper status.
Entry menu.
