UPS: OFFICE-RM 600 / 1000
Safety Instructions
OFFICE-RM Series
15
–
Install all connections appropriately and keep the cable length as
short as possible;
–
Only use suitable power cables when connection the UPS to the
mains power supply and pay attention to the required current carry-
ing capacity;
–
Only use suitable power cables when connecting appliances to the
UPS and pay attention to the required current carrying capacity;
–
The safeguarding of any appliance must always be performed imme-
diately in front of an appliance and may never be done centrally in
front of the UPS;
–
Never operate any household devices or tools such as e. g. fan heat-
ers, vacuum cleaners, electric drills, hairdryers, toasters, etc. by
means of the UPS;
–
Do not connect any appliance to the UPS that could overload the de-
vice;
–
In general, only use appropriate tools for the installation.
2.8
Operation
Only qualified personnel are allowed access to the unit and the operation of the
equipment.
It must be kept in mind that the UPS includes an energy storage or is connected
to an external energy storage unit. This means that the UPS outlet can be cur-
rent-carrying even when the UPS has already been disconnected from the
mains power supply.
Consequently, the UPS output is guaranteed to be de-energized only when the
device has completely shut down and has been disconnected from the mains
power supply.
2.9
Working with accumulators
When handling accumulators, there is always a risk of electric shock, burns
and/or chemical burns.
This is why unauthorized personnel should not have access to accumulators.
