UPS: OFFICE 400 - 2000
Installation and
Connection
OFFICE Series
27
5.1
Connection of the UPS device
The OFFICE model is equipped with plug connection. With this, the UPS can be
connected with the standard wall socket (power supply) via the power cable pro-
vided (Schuko/C13).
Provided the UPS has been connected to the mains power supply, it will start up
automatically and switch to the charging mode. An indication on the display fol-
lows. The UPS output is not active.
Ensure that the wall socket is properly secured and that the PE connection is
available.
Additionally, the loads can, for example, be connected by means of an appropri-
ate cable connection.
Attention here must also be paid that the PE connection and the proper fuse
protection for the loads are available.