Notizen
Serie
OFFICE
45
15.
Optional accessories
The components, devices and/or equipment listed below are accessories that fit
the OFFICE series and that have been tested and approved by EFFEKTA Re-
geltechnik GmbH.
15.1
Communication adapter SNMP
The SNMP adapter integrates the UPS into a network and communicates via
TCP/IP, Telnet or FTP. After assigning an individual IP-address, the UPS can
be accessed from any location, which is of particular interest for remote
administration and maintenance of the equipment.
Fig. 15-1 SNMP adapter to connect the UPS to a network.
The SNMP adapter can easily be connected to the UPS as an external adapter
via the serial port. A standard patch cable enables access to the network.
For additional information about this product and the accompanying software
package, please contact our sales and service centers.
15.2
External Bypass
An external by-pass system allows the operation of the loads on two different
paths. In the UPS operation mode (Fig. 15-2) the UPS system is integrated into
the current path and the loads are protected in the usual manner. In the by-pass
mode (Fig. 15-4), the loads are directly connected to the mains power supply,
and the UPS input and output are isolated.