Every 4 Hours
VUTEk 3r & 5r Series Maintenance Guide
16
The following maintenance tasks must be performed every 4 hours of production.
PPE Items:
GLOVES NITRILE DISPOSABLE BOX LARGE
SAFETY GLASSES
Required Items:
WIPES 9X9 CLEAN ROOM
PRINT HEAD CLEANING FLUID
How-to Video:
Directions:
NOTE: Before wiping the print heads, clean any accumulated ink residue around the print head area and the
bottom of the carriage (print head plate). This procedure should be carried out daily, at minimum, or if
needed, every 4 hours of production.
1.
Raise the carriage to its highest position.
2.
Open the printer hood and insert the retaining pins into the LH and RH pin sockets.
3.
Wipe the print head plate with print head surface cleaner.
3.0
Every Four Hours
3.1
Clean around the print head area.
