17
MAINTENANCE
Treadmill Lubrication
To reduce the friction of the walking belt and minimize wear, apply
lubricant directly onto the Treadboard and underside of the Belt.
Lift one side of the Belt and feel the top surface of the Treadboard. If the
surface is wet to the touch, no lubrication is required. If the surface is dry to the
touch, lift one edge of the Belt and spray or apply lubricant to the Treadboard.
Make sure to walk on your treadmill at a slow speed for the first 3-4 minutes of
use after applying lubricant. This helps to distribute the lubricant.
NOTE: Do not over lubricate the Treadboard. Wipe off any excess lubricant.
Lubricant may be applied whenever friction occurs, but is usually required
every 50 hours of use. This is only a guideline. Depending on your usage, you
may need to lubricate more often.
