SECONDARY CONNECTOR KIT
KD501- KD502 series
Caution!
•
Only personnel qualifying to work with high voltage equipment and circuits are
allowed to do the installation.
•
Make sure the circuits are disconnected from the voltage supply and correctly
grounded. Never connect or disconnect live circuits. Voltage is lethal.
•
Follow the local instructions for safety precautions or refer to the FAA advisory
circular AC150/5340‐26 (maintenance of Airport visual Aid Facilities). Follow also
Advisory circular AC150/5370‐10 part XI Lighting installations. Always test the
installation according to above mentioned documents and local instructions.
•
Make sure that dimensions of the cable comply with the type of connector used. In
case of any kind of non‐compliance do not proceed with the installation.
•
Check
www.efla.net
for possible updates of installation instructions.
Dimensional Data
Plug
Receptacle
Conductor Size
AWG
Cable Diameter
KD501
KD502
1.5‐2.5 mm
2
16‐14
8.5‐13.5 mm
KD501.1
KD502.1
4.0‐6.0 mm
2
12‐10/8
11.5‐18.0 mm
KD501.2
KD502.2
4.0‐6.0 mm
2
12‐10/8
8.5‐13.5 mm
