16
Basic Operation
Connecting Your Smart Device with Bluetooth
You can connect your smart device to the EFNOTE 3 to listen to audio with Bluetooth .
Connecting
1
>
2
Make sure the status is “Ready to pair“ .
If the status is “OFF”, tap it to turn on .
On your smart device
3
Turn Bluetooth on .
4
Find new device discoverable as “EFNOTE AUDIO xxx“
(xxx is any value), and select it .
5
If pin code is required, enter “0000” (four zeros) .
6
Tap [Pair] .
Disconnecting
1
Tap [Disconnect] on your smart device .
Re-connecting
1
Tap [Connect] on your smart device .
7
Make sure the status changes to “Connected”,
and your device name is displayed .
8
Now, you can listen to the audio playing on your
smart device .
*
Make sure to increase the volume of your smart device .
Controls Bluetooth
input volume
CAUTION
Be sure not to listen to audio at a high
volume . It can cause permanent hearing loss .