To remove the battery for charging, push the red button down,
hold the battery on the outside, and release from the Power chair.
To put it back, slide the battery into the battery guide slot, push
it until you hear a click, then the battery is inserted securely.
Caution:
Please remove the battery and charge it once a month if not in use
(Power chair batteries ideally should not be stored in the power
chair).
Charger and Charging
Use only the charger originally supplied with your new eFOLDi
power chair or replacement charger supplied by SunTech UK Ltd
for the use with your product. The use of a non-approved charger
will invalidate any warranty and may cause serious damage to the
battery and/or your eFOLDi product. The charger should not be
used with/or for other devices as damage caused to the charger
and/or any other device by doing so will not be covered by our
warranty.
It is highly recommended to ensure the charger is placed only on
heat resistant surfaces and nothing which could contribute to a
fire (e.g. carpet, floorboards, wood, laminate or plastic worktops
Page 23
