TeachPedant
EFORT INTELLIGENT EQUIPMENT CO.,LTD
2
3
Control key
Running program, manual inching robot (JOG)
4
Indicator light
Indicates the running state of the program
5
Mode switch knob
Automatic, manual slow, or manual full speed
6
Emergency stop button
Press the emergency stop button to stop the robot;
Turn the button clockwise to release the
emergency stop signal
Fig. 1-3 Back of teach pendant
Table 1-2 Back Components Description
No.
Name
Remarks
7
Stylus
Used to click the touch screen
8
USB
interface
protection cover
Protect USB interface
9
Enabling key
Please refer to section 1.2.2 for specific usage
10
Bracelet
When holding the teaching pendant, prevent it from
leaving
11
Outlet cover plate
The cover plate needs to be opened when replacing
the wiring harness
1.2.1 Mode Switch Knob
The mode switch knob is placed at the up right side of the teach pendant as shown in
figure 1-4 and there are three options as shown in Table 1-3.