Programming module
EFORT INTELLIGENT EQUIPMENT CO.,LTD
29
1
1
Click to select line 5;
2
In the “parameter” page
on the right, click on the
edit box and modify the
value;
3
Click on the “Apply”
button
to
save
the
modification.
Type 2: Teach method
#
Demonstration
Remarks
1
1
Rotate each joint of the
robot to the value show in
the figure in manual
mode—joint motion.
(See section 3.3.2)
2
1
Select line 5 in the
program tree;
2
Click
the
"Teach"
button in the "Parameter"
page;(The red letter in the
figure indicates the change
of posture data);
3
Click on the "Apply"
button to save the data.
3
The teach is completed.
