Settings
EFORT INTELLIGENT EQUIPMENT CO.,LTD
88
5
1
Configure the number
of interpolation axes. The
number of interpolation
axes varies, corresponding
to the difference in the
system
model,
which
corresponds to the type of
the current number of axes
that can be configured. The
number of interpolated
axes does not exceed the
total number of additional
axes, and does not exceed
the number 3.
6
1
Configure the system
model of interpolation
axes. Different number of
interpolation
axes
corresponds to different
system models. (After the
number of additional axes
is configured, then the axis
parameters are configured)
Note!
Gantry axis in the software refers to the synchronized
movement of two motors that control the gantry movement
operation. The use of gantry axes requires that the parameters of