Monitor
EFORT INTELLIGENT EQUIPMENT CO.,LTD
191
Monitoring of IO signal
Figure 7-3 Monitoring window of IO signal
7.2.1 Forced IO signal
Click the "Forced mode" switch to turn on the forced signal mode. In this mode, the
analog and digital output signal can be really forced, and the analog and digital
input signal can be simulatively forced.
(Notes: the forcing of input signal are used mostly when debugging programs)
Table 7-1 Operation steps of forcing
#
Demonstration
Description
1
Forcing of digital IO signal:
1. Click the "Forcing" switch of
the corresponding port to force
the port.
2
Forcing of analog IO signal:
1. Click the "Output" switch to
enter the setup interface;
2. Click the "Forcing" switch to
force the port;
3. Click the port of corresponding
analog signal to enter the
numerical value;