Mechanical Operations and Maintenance Manual for Industrial Robot ER10-1600
19
Fig. 3-3 Schematic Diagram of Lifting and Handling
Fig. 3-4 Schematic Diagram of Forklift Handling
Attention
When transporting, be sure to install a fixed fixture for transport!
When using other handling methods instead of cranes and forklifts, please note that
the robot's arms and motors cannot be subjected to external forces!
After unpacking and installation, be sure to remove the fixed fixture for transport
and rubber pad!
The fixed fixture will be used for robot handling in the future, please keep it
properly!
3.2 Robot Installation
Danger
1
、
Set up safety fence
Otherwise, accidents such as personal injury and equipment damage may occur.
The robot should be placed in a position where the tool and the tip of work piece
of the robot arm will not touch the safety fence even if the robot arm reaches the
longest.
Otherwise, accidents such as personal injury and equipment damage may occur.
2
、
If the robot is not fixed, it cannot be electrified and operated.
Otherwise, accidents such as toppling, personal injury, and equipment damage
may occur.
3
、
When choosing the suspended or wall-mounted installation method, it should be
fixed on the ceiling and wall with sufficient strength, and the treatment plan to
prevent falling should also be considered.
Otherwise, accidents such as personal injury and equipment damage may occur.
