ER15-4-1600 Quick Operation Manual for Industrial Robot
第
3
页
robots and understand the risks, may not operate the robot.
7. Do not use robots in the following situations:
Robot components exposed
Safety device is disabled
When all or part of the fuses and/or mechanical equipment are disabled
The processed material does not meet the requirements
More than one person is not allowed to use the machine at the same time
8. It is strictly forbidden to use any robot in violation of the above requirements,
especially not to use non-original accessories at will.
9. Do not move the safety protection device. The user is responsible for ensuring that
the safety protection device is fixed and operating in an orderly manner.
10. The safety device can only be moved during maintenance, but the operating
procedures of the maintenance personnel must be followed, and the safety of the robot
must be ensured.
Mandatory measures
1. Before starting the machine, make sure that no one is in the danger zone.
2. All operators must receive special training on the use and maintenance of industrial
machines.
3. The foreman should continue to monitor to ensure that all procedures are running
properly and ensure that the safety protection procedures are properly applied.
4. Carry out maintenance according to the maintenance requirements in this manual
to keep the industrial robot clean and tidy.
5. A suitable tool box should be prepared to summarize cleaning tools and
maintenance tools; staff must wear the personal protective equipment.
6. In addition to these instructions, the tester must also comply with current health
and safety regulations.
7. When the robot malfunctions, or is suspected of being damaged, the machine is not
running, or the machine makes abnormal noise, the machine should be stopped.
8. Once you find that the machine has a fire (regardless of the size of the fire), you
should call the police immediately and find a professional team to fight it.
9. The door of the control cabinet must be closed and not open when the machine is in
operation. Control cabinet keys must be kept by electricians.
10. When operating in the power-on mode, personnel shall not enter the safety
protection area.
11. Before starting the automatic mode, all temporarily disabled safety functions must
be restored to their normal working state
Warning
1. The release of gravity and the braking device may cause a fall hazard.
2. When the safety protection device is inspected, it may cause danger because the
safety protection device cannot work to protect the maintenance personnel. Therefore,
the maintenance personnel must be very careful and take full protective measures