ER6-1400V1.01
Industrial Robot Quick Operation Manual
32
2. Remote IO
module
configuration
First click the
password input box,
enter "
1975
", and
then click the
"
enter
" button.
Set the number
of configuration
modules, and each
set module needs to
be configured.
Select the
module type,
including input and
output of digital and
analog signals.
Set the address
of each module, pay
attention to the
length of address
occupied by
different modules,
and the occupied
address cannot be
set.
When the
selection module is
AD or DA module,
t
he type of four
channels needs to be
selected.
Click the
"
save
" button to
save the remote IO
configuration
information.
Remote IO Configuration Description:
Module quantity
: the corresponding contents of each module need to be set, otherwise it
cannot be saved.
Type:
there are six types, the input and output of digital signal, including 16 bits and 32-bit
respectively. Input and output of analog signal.
