ER6-1400V1.01
Industrial Robot Quick Operation Manual
7
Chapter 2 handling and installation
2.1 Overview
This chapter contains assembly instructions and information about installing the ER7-700 (ER2-S
cabinet) industrial robot on the job site.
Before starting any installation work, it is very important to check all safety information first! Be sure
to read the safety manual of EFORT robot carefully, as well as the first chapter of this manual. There are
several general safety aspects that must be read in full, as well as more specific safety information about the
dangers and safety risks encountered in performing the operation procedures.
2.2 Basic Description
2.2.1 unpacking list
1. Before unpacking, please confirm whether the outer package of the product is in good condition.
2. After unpacking, please confirm whether the robot accessories are complete and whether the model
is consistent with the order. In case of missing or wrong parts, please contact the supplier in time.
Table 2-1 robot packing list
开箱清单
Name
Type
Qua
ntity
Unit
Remark
Robot body
ER6-1400V1.01
1
PC
Control cabinet
EC-M6
1
PC
Teach p teach
pendant line
11500010563
1
PC
control cabinet –robot
body power line
10900021800
1
SET
Standard length 8m
，
Support
regular customization 12m
、
16
、
20m
control cabinet - robot
body encoder line
10900021801
1
SET
Standard length 8m
，
Support
regular customization 12m
、
16
、
20m
control cabinet – line
for body- ground wire
connecting
10900021958
1
SET
Standard length 8.5m
，
Support regular
customization 12.5m
、
16.5
、
20.5m
power aerial plug for
control cabinet
10900001237
1
PC
has been installed on the
control cabinet
10900001229
1
PC
10900001236
1
PC
dust cover of
10900001113
2
PC
has been installed on the
