ELECTRIC PIPE CLEANER
Automatic type
OPERATING INSTRUCTIONS
0.- Check that battery is installed.
1.- To work with the electric pipe cleaner with the automatic type turn the knob
(D) until the
thread arrives to the bottom.
2.- Moving the lever (B) it can be chosen the direction of the spring (A), advance and back.
3.- Press button (E); the spring will start turning and will clear the obstruction zone. According to
the selection it will advance or move back.
4.- Steps 2 and 3 must be followed until the pipe is totally clean.
5.- Once the pipe is totally clean, move the position of the lever (B) and press the button (E), the
spring will return to the initial position.
Power
600W
Voltage
7.2V
Frequencies
50 Hz or 60 Hz optional
Adjustable speed
0 - 500 rpm
