41
(COD. 51253 only)
Setup feature:
In Setup, press to select OFF at the
selection of HIGH and LOW.
Press the button
once after entering Setup
mode.
(COD. 51254 only)
Store feature:
Store the current measurement value.
Press EXIT to exit
the Store feature.
Press the button
once.
Recall feature:
Recall the stored value. Press EXIT to exit
the Recall feature.
Press and hold the button for
over 1second.
Setup feature:
In Setup, press to select OFF at the
selection of HIGH and LOW.
Press the button
once after entering Setup
mode.
Hold feature:
Press HOLD to freeze the displayed value.
Press EXIT to
release the display.
Press the button once.
Peak Hold feature:
Press to access Peak Hold feature, the
primary display
shows PEAK HOLD. Press EXIT to exit.
Press and hold the button for
over 1second.
- In Setup, each press to select the digit
you want to edit.
- In Recall, press to enable SEND feature
(COD. 51254 only)
- In Store, press to toggle between clearing
all the stored
reading or start storing reading from the
current index
number. (COD. 51254 only)
Press the button once after
entering
Setup or Recall or Store mode.
Press to exit certain button functions and
the Meter will return to the factory default
setting.
Press the button once.
Press to turn the backlight on. It is possible
to toggle between
1st and the 2nd backlight level and Exit
the feature by pressing
this button. After exiting the light feature,
it is necessary to
press and hold the button for over 1
second to turn the
backlight on again.
Press and hold the button for
over 1 second.
(COD. 51253 only)
Press to display max, min and average
values.
Press EXIT to stop and return to current
measurement mode.
Press the button once.
In Setup, each press to decrement an
Option.
Press the button once after
entering SEND mode.
