55
Table 5-1. Setup Selections
Selection
Option
Factory
Default
Description
HIGH
Max. 20000; Press
to select
OFF
Press
to select the digit you
want to edit
OFF
Over the upper limits, beeps not
continuously
LOW
Max. 20000; Press
to select
OFF
Press
to select the digit you
want to edit
OFF
Over the lower limits, beeps not
continuously
10
10 mins
10 mins power off
20
20 mins power off
30
30 mins power off
OFF
Power off feature is disabled
1
1
Beeps continuously and icon lights on
OFF
No beep, icon flashes
10
10
Backlight turn off in 10 seconds
20
Backlight turn off in 20 seconds
30
Backlight turn off in 30 seconds
OFF
Disable backlight feature
Analogue
Bar
Graph
Zero is in the left hand side
Zero is in
the
center
Zero is in the center
It can only apply to DCV, DCI and °C/°F
functions
Saving Setup Options
At each setup Option, store your choice and exit setup by press
EXIT
, advance to the next
Option by press
+
.
To exit the Setup mode without saving the present Option, press
Setup
.
6. MAINTENANCE
This chapter provides basic maintenance information including battery and fuse replacement
instruction.
Warning!
Do not attempt to repair or service your Meter unless you are qualified to do so and
have the relevant calibration, performance test, and service information
A. General Service
- Periodically wipe the case with a damp cloth and mild detergent. Do not use abrasives or
solvents.
- To clean the terminals with cotton bar with detergent, as dirt or moisture in the terminals can
affect readings.
- Turn the Meter to OFF when it is not in use.
