21
DISPLAY SYMBOLS (SEE FIGURE 2)
Nº
Symbol
Meaning
1
Data hold is active
2
Indicates negative reading
3
The battery is low.
Warning:
To avoid false readings, which could lead to possible electric
shock or personal injury, replace the battery as soon as the battery
indicator appears.
4
hFE
Unit of Transistor
5
ºC
Centigrade temperature
6
Test of diode
7
The continuity buzzer is on
8
Dangerous Voltages
MEASUREMENT OPERATION
• Make sure the Sleep Mode is not on if you found there is no display on the LCD after turning
on the Meter.
• Make sure the Low Battery Display
is not on, otherwise false readings may be
provided.
• Pay attention to the
symbol which is located besides the input terminals of the Meter
before carrying out measurement.
A. DC VOLTAGE MEASUREMENT (SEE FIGURE 3)
Warning!
To avoid harms to your or damages to the Meter from electric shock, please do not attempt to
measure voltages higher than 1000V or 750V rms although readings may be obtained.
Take extra attention when measuring high voltages to avoid electric shock.
To measure DC voltages, connect the Meter as follows:
1. Insert the red test lead into the
input terminal and the black test lead into the COM
input terminal.