EG4xxx Owner’s Manual
2
INSTALLATION
1
Introduction
Thank you and congratulations to your purchase of an eGauge device! Properly
installed, the device will be able to record and report energy usage and production
for years to come.
The first and second section of this manual describes installation and commis-
sioning of the product. The third section provides operating instructions and is
followed by a section on equipment maintenance. The appendices provide the
device specifications and a reference to troubleshooting information.
Please visit the eGauge support site to verify you have the latest version of this
manual. There, you can also find additional training materials, tutorial videos,
configuration guide, and CT-selection guides:
http://kb.egauge.net/
2
Installation
Installation must be performed by a licensed electrician according to all applicable
local, national, and international codes.
CAUTION:
The eGauge power connector carries high voltage. For safety, the
device must be installed in a suitably rated enclosure for the installation envi-
ronment. The enclosure must have a screw-on or locking cover that prevents
accidental touch of the power connector.
2.1
What’s included in the box
• 1
×
EG4xxx device
• 1
×
AC Power plug (5-position plug)
• 1
×
DC Power plug (2-position plug)
• 0–30
×
Current transformers (CTs) w/ 8ft wires & plug (as ordered)
• 1
×
HomePlug AV wall-outlet adapter w/5ft Ethernet cable (if ordered)
April 6, 2022
2