2
INSTALLATION
EG4xxx Owner’s Manual
Figure 5: CT Connector
The CT Connector is rated for wiring one to thirty units of the CTs listed in Sec-
tion B.6. The input voltage rating is 0.333Vrms at the rated current.
NOTE:
There is no risk of damage if a CT plug is accidentally inserted such
that it straddles the pins for two different CTs. If this happens, the eGauge will
not be able to measure power properly but otherwise there are no ill effects. To
correct the problem, simply remove and re-insert the plug at the right position.
2.7.5
Ethernet (LAN) and USB Connector
This connector is shown in Figure 6. It provides hard-wired Ethernet connectivity
via an RJ45 plug and two USB host ports via Type-A Female plugs.
Figure 6: Ethernet Connector
9
April 6, 2022
