www.egiaudio.com
NOTE:
This process can be aborted at any time by pressing the
MENU
exit key
.
40230, 40240
control unit
26
audio functions
From your
EGi
ref.
40230
and
40240
control unit, you will have control over the audio programs in your
installation.
VOLUME CONTROL
To modify the volume in the room where the control unit is installed, press (
OK/+
) to increase or (
OFF/-
)
to decrease the volume.
PROGRAM CHANGE
Depending on the central unit and the control unit of your system, up to 3 programs can be chosen. (Three
general and a local one, depending on the control unit).
To change between available programs, press the
MENU
key
until
AUD
appears on the display. Then,
using (
OK/+
) check the available programs.
NOTE:
You can exit to the main menu at any point by pressing
EXIT MENU
key
twice.
RADIO STATION TUNING AND MEMORIZATION
To select a radio station in the local tuner or the central unit, please do as
follows:
1.
Press repeatedly the
MENU
key
until
AUD
appears on the display.
2.
Then, press (
OK/+
) to visualize
PR-1
. (If you are tuning a local program,
L
will appear).
3.
Press the
MENU
key
again and
M
followed by the memory position
of the tuned station.
4.
If you press (
OFF/–
) or (
OK/+
) then, you will see the memory position
and frequency for the stored radio stations.
5.
By pressing the
MENU
key
again,
SCAN
will appear on the display.
6.
Press shortly (
OFF/–
) or (
OK/+
) to increase or decrease the tuned
frequency manually. If you make that press longer, the search will be
performed automatically, and
SRCH
will appear on the display.
7.
Once the radio station has been chosen, pressing the
MENU
key
will
present
SAVE
on the display.
VOLUME
PROGRAM CHANGE
–
A V D
P R
. –
1
S T 0 1
–
S E T
–
A d j
R S E T
1
st
2
nd
1
st
2
nd
Summary of Contents for DOMOS2
Page 1: ...english user s manual ...
