INSTALLING THE BATTERY
9
OPERATING YOUR TRANSMITTER
Install 9 volt battery (included), to prevent damage to
transmitter, remove the battery if not used for long
periods. (Fig. 17)
Restore power to ceiling fan and test for proper
operation.
1. HI, MED, and LOW buttons:
These three buttons are used to set the fan speed as
follows:
HI= high speed
Med= medium speed
Low= low speed
2. OFF button:
This button turns the fan off.
3. The " " button turns the light ON or OFF and also
controls the brightness setting. Press and release the
button to turn the light ON or OFF. Press and hold the
button to set the desired brightness. The light key has
an auto-resume, it will stay at the same brightness as
the last time it was turned off.
Fig. 17
Fig. 18
9
Vo
lt
B
at
te
ry
