4-core Sensor
3-core Sensor
2-core Sensor
1.
The above illustrations tell you which switch position
your sensor requires.
2.
Use a tool with a fine tip to set the DIP switches to
the required position. If necessary, use a magnifying
glass.
Proceed to connect the individual cable cores to the
terminals as displayed in the images.
1.
Depress the fixture corresponding with the terminal
to which you want to connect the cable core.
2.
Insert the core into the terminal.
3.
Release the fixture.
4.
Test the connection by lightly pulling at the cable.
In order to remove the cable, depress the fixture again
and pull the cable out.
14
