8.3.4 Dynamic and Static Network Configuration
Open the page
System / Network
in the configuration
area to select the dynamic network configuration using
DHCP or Zeroconf.
1.
Click the
Edit
button next to the entry
WiFi
.
Proceed as described in section
8.3.5 WLAN Models: Selecting the Active Network Interface
Querx WLAN switches between the Ethernet and WiFi
interfaces according to whether it can detect a wired
Ethernet connection.
If a wired network connection is detected, Querx WLAN
activates the Ethernet interface. If no wired connection
is detected or an existing connection is disrupted, the
device will activate the WiFi interface.
The device needs to reboot, in order to change the
active network interface. This process can take a little
while.
The status LED indicates which network interface is
currently active. The LED flashes
green
when the Ethernet interface is active
blue
when the WiFi interface is active.
8.3.6 Deactivating the Discovery Function
In standard settings, Querx is accessible via the
Discovery Service,
in order to facilitate the manual
configuration of its network settings using the
application
Device Discoverer
. It is advisable to
deactivate this service once the device is configured to
76