4.4 Event Descriptions
You can enter descriptions of occurring events on the
page
Interfaces / Email
. These descriptions are also
used in the event table, as explained in chapter
1.
Enter a description for the event that values fall
below the lower limit
.
2.
Enter a description for the event that values
rise
above the upper limit
.
3.
Enter a description for the event that values
return
to their normal state
.
4.
Enter a description for the event that values are
falling too quickly
.
5.
Enter a description for the event that values are
rising too quickly
.
6.
Enter a description for the event that a
sensor failure
occurs.
7.
Click
Save
to apply your changes.
45
