The first section displays the device’s name, type and
the active firmware.
The device name can be changed in the configuration
area. In default settings, the system name is
querx000000, where the six zeros are placeholders for
the last six digits of the device’s MAC-address.
The second section displays the time that has elapsed
between the first and last entries in the data logger, as
well as the percentage of its memory that has been
used. It also shows the system’s time of operation since
the last system start and the current date and time.
5.4 Viewing Recent Sensor Events
The 16 most recent events, such as alerts, values
returning to their normal state or sensor failures, can be
viewed in the configuration area.
Open the page
Maintenance / Events
.
52
