8 Advanced System Configuration
The main settings have already been explained in
chapter 2.9
. The following sections
describe further possible settings in detail.
8.1 General Settings
The configuration area’s home page is the sub menu
S
ystem / General
. This is where you can enter general
information on the device.
The
contact
and
location
parameters can be retrieved
via SNMP (cf. Section
The
language
selection lets you set the web interface’s
language. The
date format
field is used to select the
format in which calendar dates are displayed in the web
interface and in exported files.
1.
The
system name
identifies the device whenever it
sends alert notifications and when using M2M
interfaces. It also serves as the host name that can
be used to access Querx via a web browser (cf.
Section
2.7 Accessing the Web Interface
). You can
use up to 15 letters and digits, but you should refrain
from using special characters, in order to ensure
compatibility with other systems.
2.
If you wish, enter the responsible contact person into
the input field
Contact
3.
and enter the device’s location into the input field
System Location.
These are both simple information
70
